FRONT SEAT ASSEMBLY(for Front Passenger Side Power Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH


    1. Check the operation of the slide motor.


      1. A01IFL2C01
        *a

        Component without wire harness connected

        (Front Seat Adjuster Assembly RH (Slide Motor))

        Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

        OK
        Condition Specified Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Forward

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Backward

        Tech Tips

        If the result is not as specified, replace the front seat adjuster assembly RH.

  2. INSPECT FRONT SEAT BACK FRAME SUB-ASSEMBLY RH


    1. A01IFL2C01
      *a

      Component without wire harness connected

      (Front Seatback Frame Sub-assembly RH (Reclining Motor))

      Check the operation of the reclining motor.


      1. Apply battery voltage to the reclining motor connector, and check that the separate type front seatback spring assembly RH operates smoothly as follows.

        OK
        Condition Specified Condition

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Forward

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Backward

        Tech Tips

        If the result is not as specified, replace the front seatback frame sub-assembly RH.

  3. INSPECT LOWER INNER RECLINING ADJUSTER ARM SUB-ASSEMBLY RH


    1. Check the operation of the swing motor RH.


      1. A01IFL2C01
        *a

        Component without wire harness connected

        (Lower Inner Reclining Adjuster Arm Sub-assembly RH (Swing Motor))

        Apply battery voltage to the swing motor RH connector, and check that the lower inner reclining adjuster arm sub-assembly RH operates smoothly as follows.

        OK
        Condition Specified Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Upward

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Downward

        Tech Tips

        If the result is not as specified, replace the lower inner reclining adjuster arm sub-assembly RH.