DIGITAL INNER MIRROR INSTALLATION

PROCEDURE


  1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY


    1. B006Q1WC01
      B006N8A Install in this Direction

      Slide the inner rear view mirror assembly as shown in the illustration to temporarily install the inner rear view mirror assembly.

    2. B006PF1

      Using a T20 "TORX" socket wrench, install inner rear view mirror assembly with the "TORX" screw.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }
    3. B006RLN

      Connect the 2 connectors.

  2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER


    1. B006PBKC01
      B006N8A Install in this Direction

      Attach the guide and clip as shown in the illustration to install the inner rear view mirror stay holder cover.

  3. INSTALL NO. 2 INNER REAR VIEW MIRROR STAY HOLDER COVER


    1. B006LPQC01
      B006N8A Install in this Direction (1)
      B006NJK Install in this Direction (2)

      Attach the guide the direction indicated by the arrow (1) shown in the illustration.

      Note

      Insert the guide all the way.

    2. Rotate the guide around the shaft and attach the claw in the installation direction (2) shown in the illustration to install the No. 2 inner rear view mirror stay holder cover.

      Note

      If the claw are attached separately they may become damaged. Therefore, attach them at the same time.