DIGITAL INNER MIRROR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INNER REAR VIEW MIRROR STAY HOLDER COVER


    1. B006OOFC01
      B006N8A Remove in this Direction (1)
      B006NJK Remove in this Direction (2)

      Detach the claw in the direction indicated by the arrow (1) in the illustration.

      Note

      If the 2 claws are detached separately they may become damaged. Therefore, remove them at the same time.

    2. Detach the guide in the direction indicated by the arrow (2) in the illustration to remove the No. 2 inner rear view mirror stay holder cover.

  2. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER


    1. B006QEGC01
      B006N8A Remove in this Direction

      Detach the clip, guide and remove the inner rear view mirror stay holder cover as shown in the illustration.

  3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY


    1. B006RLN

      Disconnect the 2 connectors.

    2. B006PF1

      Using a T20 "TORX" socket wrench, remove the "TORX" screw.

    3. B006N67C01
      B006N8A Remove in this Direction

      Slide the inner rear view mirror assembly as shown in the illustration and remove the inner rear view mirror assembly.