COMBINATION METER INSTALLATION

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. B006O2V

      Connect the 2 connectors.

    2. Engage the clamp.

    3. B006ORSC01
      B006N8A Install in this Direction

      Engage the claws to install the combination meter assembly as shown in the illustration.

  2. INSTALL INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  3. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for Separate Console Box Type)

    Click here

  5. INSTALL CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL (for Separate Console Box Type)

    Tech Tips

    Use the same procedure as for the center No. 1 instrument cluster finish panel. (for Separate Console Box Type)

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (for Integrated Console Box Type)

    Click here

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for Integrated Console Box Type)

    Tech Tips

    Use the same procedure as for the instrument panel finish panel end LH. (for Integrated Console Box Type)

  8. INSTALL NO. 2 BOX BOTTOM MAT (for Integrated Console Box Type)

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here