BLOWER UNIT(for RHD) INSTALLATION

PROCEDURE

1. INSTALL BLOWER ASSEMBLY

   
   

   1. Attach the claw to install the blower assembly.

      

   2. Install the 2 screws.

   3. Connect the connector to the No. 1 blower damper servo sub-assembly.

   4. w/ PTC Heater:

      Attach the harness clamp and guide, and connect the blower assembly side of the No. 2 cooler wiring.

   5. 

      *1

      Guide

      w/ PTC Heater:

      Install the screw.

2. INSTALL AIR CONDITIONER UNIT ASSEMBLY

   Click here