BLOWER UNIT(for RHD) REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. A01IKXU

      Attach the arm of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.

    2. Install the No. 1 blower damper servo sub-assembly with the 2 screws.

  2. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. A01IJDK

      Install the blower with fan motor sub-assembly with the 3 screws.

  3. INSTALL CLEAN AIR FILTER


    1. A01IL26C01
      B006N8A Install in this Direction

      Align the "UP" marks as shown in the illustration and install the clean air filter.

      Note

      Make sure that the "UP" mark is facing the correct direction before installing the filter.

  4. INSTALL AIR FILTER COVER PLATE


    1. A01IGZAC01
      B006N8A Install in this Direction (1)
      B006NJK Install in this Direction (2)

      Attach the claw and guide to install the air filter cover plate.