METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Driver Side Seatbelt Warning Buzzer Driver Side Seatbelt Warning Buzzer*1 ON 0:OFF,1:ON Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer Front Passenger Side Seatbelt Warning Buzzer*1 ON 0:OFF,1:ON Combination meter assembly
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Medium 10:Large,00:Medium,01:Small Combination meter assembly
        Lane Change Flashing Times Setting Function to set the number of lane change flashes OFF 00:OFF,01:3,10:5,11:7 Combination meter assembly
        Flasher Sound Tone Setting Function to change Flasher Sound Tone Tone 1 00:Tone 1,01:Tone 2,10:Tone 3 Combination meter assembly

        • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more


        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to turn on/off the ECO driving indicator in the multi-information display ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the engine switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

    2. Customizing with the combination meter assembly


      1. Turn the engine switch on (IG).

      2. Enter the following menu: Settings.

      3. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.

        Roof Illumination
        Combination Meter Assembly Display Description Default Setting ECU
        Adjust Brightness Function to change the lighting brightness - Turn Off, 100%, 75%, 50%, 25% Combination meter assembly
        Illumination Color Function to change the lighting color - 16 colors available to select from Combination meter assembly
        Personal Lamp Function to turn the personal light on/off - Turn Off, Lounge Mode Combination meter assembly

        Tech Tips

        For functional inspection, refer to Lighting System

        Settings
        Combination Meter Assembly Display Description Default Setting ECU
        Toyota Parking Assist-sensor System Function that turns the Toyota parking assist-sensor system on or off ON ON or OFF Combination meter assembly

        nanoeTM*1

        Function that turns the nanoeTM*1 generator on or off

        		 ON ON or OFF Combination meter assembly
        Stop and Start System Function to change the idling stop time Balance Balance, Idle stop time Combination meter assembly
        Eco Driving Indicator Light Function to activate/deactivate the eco driving indicator light ON ON or OFF Combination meter assembly
        Power Slide Door Buzzer Tone Function to change Power Slide Door Buzzer Tone Buzzer A Buzzer A, Buzzer B, Buzzer C Combination meter assembly
        Power Slide Door Buzzer Volume Function to activate/deactivate the EV driving indicator light High OFF, Low, High Combination meter assembly
        Language Function to change the language on the display English English, Japanese Combination meter assembly
        Units Function to change the units on the display km (L/100 km) km (km/L), km (L/100 km) Combination meter assembly
        Switch Settings Function to change the screen assigned to the TOP button on the steering pad switch assembly - - Combination meter assembly
        Drive Info 1 Function to change the item to be displayed on Drive Info 1

        • Current Fuel Economy (Bar Type)

        • Average Fuel Economy (After Reset)

        		 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Reset, After Start), Distance (Range, After Start), Other (Blank) Combination meter assembly
        Drive Info 2 Function to change the item to be displayed on Drive Info 2

        • Average Speed (After Reset)

        • Distance (Range)

        		 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Reset, After Start), Distance (Range, After Start), Other (Blank) Combination meter assembly
        Pop-up Display Function to change the interrupt display setting of each item ON ON or OFF Combination meter assembly
        Color Function to change the cursor color when selecting a displayed item Blue Blue, Green, Red or Yellow Combination meter assembly
        Initialization The setting items can be initialized - - Combination meter assembly

        • *1: nanoeTMis a trademark of Panasonic Corporation.