BACK DOOR COURTESY SWITCH INSTALLATION

PROCEDURE


  1. INSTALL BACK DOOR LOCK ASSEMBLY

    Tech Tips

    Make sure to remove the string before installing a new back door lock assembly.


    1. Apply MP grease to the sliding parts of the back door lock assembly.

    2. B006O6JC02
      B006QOD Bolt
      B006LKF Connector
      B006N8A Install in this Direction

      Install the back door lock assembly with the 4 bolts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    3. Attach the clamp and connect the wire harness.

    4. Connect the connector.

  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  3. INSTALL SWITCH BEZEL (w/ Power Back Door)

    Click here

  4. INSTALL BACK DOOR INSIDE HANDLE

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH LH (w/ Power Back Door)

    Click here

  6. INSTALL BACK DOOR SIDE GARNISH LH (w/o Power Back Door)

    Click here

  7. INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)

    Click here

  8. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  9. INSTALL CENTER BACK DOOR GARNISH

    Click here