BACK DOOR COURTESY SWITCH REMOVAL

PROCEDURE

1. REMOVE CENTER BACK DOOR GARNISH

   Click here

2. REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)

   Click here

3. REMOVE BACK DOOR SIDE GARNISH LH (w/ Power Back Door)

   Click here

4. REMOVE BACK DOOR SIDE GARNISH LH (w/o Power Back Door)

   Click here

5. REMOVE BACK DOOR SIDE GARNISH RH

   Click here

6. REMOVE BACK DOOR INSIDE HANDLE

   Click here

7. REMOVE SWITCH BEZEL (w/ Power Back Door)

   Click here

8. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

   Click here

9. REMOVE BACK DOOR LOCK ASSEMBLY

   
   

   1. 

      	Bolt
      	Connector
      	Remove in this Direction

      Disconnect the connector.

   2. Detach the clamp and disconnect the wire harness.

   3. Remove the 4 bolts and back door lock assembly as shown in the illustration.