REAR DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. B006MZR

      Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the "TORX" screw.

      Tech Tips

      The following procedures for connecting the connector must be performed with 2 people.

    2. Have one person pull the front side of the rear quarter trim panel assembly LJ toward the center of the vehicle and hold it in position after enough space is provided to connect the connector.

      B006MEC
    3. B006LTU

      The other person should then connect the connector.

    4. B006NCEC01
      *a Claw A
      *b Claw B
      B006LKF Order of Installation

      Starting from the bottom of the rear quarter trim panel assembly LH, attach the clips in the order shown in the illustration.

    5. Attach the claw B and claw A.

    6. B006MMUC04
      *a Disconnected Area

      Return the No. 1 slide door weatherstrip LH to its original position.