REAR DOOR COURTESY SWITCH INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A01IL8KC05
      *a

      Component without harness connected

      (Rear Door Courtesy Light Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      Terminal 1 - Switch body Pushed 10 kΩ or higher
      Not pushed Below 1 Ω

      If the result is not as specified, replace the rear door courtesy light switch assembly.