FOOTWELL LIGHT(for LHD) INSPECTION

PROCEDURE

1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (No. 1 Interior Illumination Light Assembly LH)

      Inspect the No. 1 interior illumination light assembly LH.

      
      

      1. Apply battery voltage to the connector and check the light illumination condition.

         OK
         Measurement Condition Condition Specified Condition Battery positive (+) → 2 (B) Battery negative (-) → 1 (L) Always No. 1 interior illumination light assembly LH illuminates

         If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (No. 1 Interior Illumination Light Assembly RH)

      Inspect the No. 1 interior illumination light assembly RH.

      
      

      1. Apply battery voltage to the connector and check the light illumination condition.

         OK
         Measurement Condition Condition Specified Condition Battery positive (+) → 2 (B) Battery negative (-) → 1 (L) Always No. 1 interior illumination light assembly RH illuminates

         If the result is not as specified, replace the No. 1 interior illumination light assembly RH.