INSTRUMENT PANEL BOX LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. B006LLRC19
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 1 (E)

      		 Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly.