GLOVE BOX LIGHT(for LHD) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. B006LLRC18
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly)

      Inspect the No. 1 interior illumination light assembly.


      1. Apply battery voltage to the connector and check the light illumination condition.

        OK
        Measurement Condition Condition Specified Condition

        Battery positive → 2(B)

        Battery negative → 1(L)

        		 Always No. 1 interior illumination light assembly illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly.