DOOR COURTESY LIGHT DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL COURTESY LIGHT BULB


    1. A01IGT1C06
      *1 Housing
      *2 Cover
      *a Protective Tape
      B006N8A Remove in this Direction

      Using a thin-bladed screwdriver, detach the claw as shown in the illustration.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    2. Remove the housing and cover.

    3. A01IF5DC07
      B006N8A Remove in this Direction

      Remove the cover as shown in the illustration.

    4. A01IF8XC07
      B006N8A Remove in this Direction

      Remove the courtesy light bulb as shown in the illustration.