VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01IKJZC01
      B006PCE Protective Tape
      B006N8A Remove in this Direction

      Using a thin-bladed screwdriver, detach the claw and guide.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    2. A01IGF6C01
      B006N8A Remove in this Direction

      Detach the claw and remove the vanity light assembly as shown in the illustration.

  2. REMOVE VANITY LIGHT BULB


    1. A01IIY1C03
      B006N8A Remove in this Direction

      Remove the vanity light bulb from the vanity light bulb holder as shown in the illustration.