VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT VANITY LIGHT ASSEMBLY


    1. A01IKJZC02
      B006PCE Protective Tape
      B006N8A Remove in this Direction

      Using a thin-bladed screwdriver, detach the claw and guide and disconnect the vanity light assembly.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

  2. REMOVE VANITY LIGHT BULB


    1. A01IJE7C02
      B006N8A Remove in this Direction

      Remove the vanity light bulb from the vanity light bulb holder.

  3. INSTALL VANITY LIGHT BULB


    1. A01IHDXC02
      B006N8A Install in this Direction

      Install the vanity light bulb to the vanity light bulb holder.

  4. CONNECT VANITY LIGHT ASSEMBLY


    1. A01IEY4C02
      B006N8A Install in this Direction

      Attach the guide and claw to connect the vanity light assembly.