SECURITY HORN ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL SECURITY HORN ASSEMBLY

   
   

   1. 

      Connect the connector.

   2. Engage the clamp to connect the wire harness.

   3. 

      Engage the guide to install the security horn assembly with the bolt.

2. INSTALL V-BANK COVER SUB-ASSEMBLY (w/ Cover)

   Click here

3. INSTALL COWL TOP OUTER PANEL SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL COWL TOP OUTER PANEL SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

   Click here

6. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

   Click here

7. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

   Click here

8. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

   Click here

9. CONNECT BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for LHD)

   Click here

10. CONNECT BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for RHD)

    Click here

11. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for LHD)

    Click here

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for RHD)

    Click here

13. INSPECT WASHER NOZZLE

    Click here