ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. A01IGDJC01
      *a

      Component without harness connected

      (Engine Hood Courtesy Switch (Hood Lock Assembly))
      *b Locked
      *c Unlocked

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 Locked Below 1 Ω
        1 - 2 Unlocked 10 kΩ or higher

        If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).