ELECTRICAL KEY OSCILLATOR(for Center Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the claws to install the No. 2 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

2. CONNECT REAR FLOOR MAT ASSEMBLY RH

   
   

   1. 

      Return

      Return the rear floor mat assembly RH as shown in the illustration.

3. INSTALL NO. 6 SEAT TRACK LOWER RAIL PROTECTOR (for Super Long Slide Seat)

   Click here

4. INSTALL SEAT TRACK LOWER RAIL PROTECTOR

   Click here

5. INSTALL NO. 4 FLOOR CARPET MOULDING (for Super Long Slide Seat)

   Click here

6. INSTALL NO. 3 FLOOR CARPET MOULDING

   Click here

7. INSTALL REAR NO. 3 FLOOR BOARD UPPER PLATE

   Click here

8. INSTALL UTILITY BOX SUB-ASSEMBLY

   Click here

9. INSTALL REAR NO. 3 FLOOR BOARD ASSEMBLY

   Click here

10. INSTALL REAR SEAT LOCK STRIKER COVER LH

    Click here

11. INSTALL REAR SEAT LOCK STRIKER COVER RH

    Tech Tips

    Use the same procedure as for the RH side.

12. INSTALL REAR SEAT TRACK SLIDE STOPPER

    Click here

13. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    
    

    1. for Power Captain Seat with Memory:

       Click here

    2. for Power Captain Seat without Memory:

       Click here

    3. for Manual Captain Seat:

       Click here

14. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    
    

    1. for Power Captain Seat with Memory:

       Tech Tips

       Use the same procedure as for the RH side.

    2. for Power Captain Seat without Memory:

       Tech Tips

       Use the same procedure as for the RH side.

    3. for Manual Captain Seat:

       Tech Tips

       Use the same procedure as for the RH side.

15. INSTALL FRONT SEAT ASSEMBLY LH (for Super Long Slide Seat)

    Click here