ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Integrated Console Box Type)


    1. A01IK1GC02
      B006N8A Install in this Direction

      Engage the clamp to install the No. 1 indoor electrical antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Separate Console Box Type)


    1. A01IFQ4C01
      B006N8A Install in this Direction

      Engage the clamp to install the No. 1 indoor electrical antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

  3. INSTALL CONSOLE BOX ASSEMBLY (for Integrated Console Box Type)

    Click here

  4. INSTALL CONSOLE UPPER PANEL SUB-ASSEMBLY (for Separate Console Box Type)

    Click here

  5. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (for Separate Console Box Type)

    Click here