ELECTRICAL KEY OSCILLATOR(for Front Floor) REMOVAL

PROCEDURE


  1. REMOVE CONSOLE BOX ASSEMBLY (for Integrated Console Box Type)

    Click here

  2. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (for Separate Console Box Type)

    Click here

  3. REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY (for Separate Console Box Type)

    Click here

  4. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Integrated Console Box Type)


    1. A01IEOPC02
      B006N8A Remove in this Direction

      Disconnect the connector.

    2. Using a clip remover, disengage the clamp to remove the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

  5. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Separate Console Box Type)


    1. A01IJRLC01
      B006N8A Remove in this Direction

      Disconnect the connector.

    2. Using a clip remover, disengage the clamp to remove the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.