DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Engine switch (ACC) signal | ON or OFF | ON: Engine switch (ACC) OFF: Engine switch off |
- |
| IG SW | Engine switch on (IG) signal | ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off or (ACC) |
- |
| RR Door Courtesy SW | Rear door courtesy light switch assembly RH | ON or OFF | ON: Slide door RH open OFF: Slide door RH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch assembly LH | ON or OFF | ON: Slide door LH open OFF: Slide door LH closed |
- |
| Back Door Courtesy SW | Back door courtesy light switch | ON or OFF | ON: Back door open OFF: Back door closed |
- |
| FR Door Lock Pos | Front door RH unlock detection switch | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch assembly RH | ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door LH unlock detection switch | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch assembly LH | ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| Hood Courtesy SW | Engine hood courtesy switch | ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch | ON or OFF | ON: Rear door RH unlocked OFF: Rear door RH locked |
- |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch | ON or OFF | ON: Rear door LH unlocked OFF: Rear door LH locked |
- |
| Communication Theft Deterrent | Connection status between theft deterrent ECU and main body ECU (multiplex network body ECU) | STOP or OK | STOP: Communication stopped OK: Normal communication |
Not applicable |
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Vehicle Horn | Vehicle horns | OFF/ON | - |
| Security Horn | Security horn assembly | OFF/ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator | OFF/ON | - |