THEFT DETERRENT SYSTEM TERMINALS OF ECU


  1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND JUNCTION BLOCK ASSEMBLY LH

    B006MFRC01
    *1 Junction Block Assembly LH - -
    B006Q2ZC04
    *1 Main Body ECU (Multiplex Network Body ECU) - -

    1. Remove the main body ECU (multiplex network body ECU) from junction block assembly LH.

      Click here

    2. Reconnect the junction block assembly connectors LH.

    3. Measure the resistance and voltage according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      MB-31 (BECU) - Body ground - Battery power supply Always 11 to 14 V
      MB-32 (IG) - Body ground - IG power supply Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V
      MB-30 (ACC) - Body ground - ACC power supply Engine switch on (ACC) 11 to 14 V
      Engine switch off Below 1 V
      MB-11 (GND1) - Body ground - Ground Always Below 1 Ω
      G63-6 (FLCY) - Body ground GR - Body ground Front door courtesy light switch assembly LH input Front door LH closed (OFF) 10 kΩ or higher
      Front door LH open (ON) Below 1 Ω
      G63-27 (FRCY) - Body ground L - Body ground Front door courtesy light switch assembly RH input Front door RH closed (OFF) 10 kΩ or higher
      Front door RH open (ON) Below 1 Ω
      MB-13 (LCTY) - Body ground - Rear door courtesy light switch assembly LH input Rear door LH closed (OFF) 10 kΩ or higher
      Rear door LH open (ON) Below 1 Ω
      MB-2 (RCTY) - Body ground - Rear door courtesy light switch assembly RH input Rear door RH closed (OFF) 10 kΩ or higher
      Rear door RH open (ON) Below 1 Ω
      MB-4 (BCTY) - Body ground - Back door courtesy light switch input Back door closed (OFF) 10 kΩ or higher
      Back door open (ON) Below 1 Ω
      G63-11 (HCTY) - Body ground B - Body ground Engine hood courtesy switch input Engine hood open (OFF) 10 kΩ or higher
      Engine hood closed (ON) Below 1 Ω

    4. Install the main body ECU (multiplex network body ECU) to junction block assembly LH.

      Click here

    5. Measure the voltage and check for pulses according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      4H-22 (LSFL) - Body ground SB - Body ground Front door LH unlock detection switch input Front door LH unlocked Below 1 V
      Front door LH locked

      Pulse generation

      (11 to 14 V)
      4A-38 (LSFR) - Body ground Y - Body ground Front door RH unlock detection switch input Front door RH unlocked Below 1 V
      Front door RH locked

      Pulse generation

      (11 to 14 V)
      4H-35 (LSWL) - Body ground SB - Body ground Rear door LH unlock detection switch input Rear door LH unlocked Below 1 V
      Rear door LH locked

      Pulse generation

      (11 to 14 V)
      G62-2 (LSWR) - Body ground V - Body ground Rear door RH unlock detection switch input Rear door RH unlocked Below 1 V
      Rear door RH locked

      Pulse generation

      (11 to 14 V)
      G63-29 (L2) - Body ground V - Body ground Driver door key-linked lock input Driver door key cylinder turned to lock position Below 1 V
      Driver door key cylinder off

      Pulse generation

      (11 to 14 V)
      G63-2 (UL3) - Body ground W - Body ground Driver door key-linked unlock input Driver door key cylinder turned to unlock position Below 1 V
      Driver door key cylinder off

      Pulse generation

      (11 to 14 V)
      4F-24 (SH) - Body ground BR - Body ground Security horn assembly drive

      Security horn assembly sounding

      (Theft deterrent system in alarm sounding state)

      		 Below 1 V
      4F-25 (HORN) - Body ground B - Body ground Vehicle horn drive

      Vehicle horns sounding

      (Theft deterrent system in alarm sounding state)

      		 Below 1 V