SMART ENTRY AND START SYSTEM(for Start Function) PARTS LOCATION
ILLUSTRATION
| *A | for 2AR-FE | *B | for 2GR-FKS |
| *1 | NO. 1 INTEGRATION RELAY | *2 | STARTER ASSEMBLY |
| *3 | PARK/NEUTRAL POSITION SWITCH | *4 | ECM |
| *5 | NO. 1 ENGINE ROOM RELAY BLOCK - IG2 RELAY - ST NO. 1 RELAY - ST NO. 2 RELAY - IG2-MAIN FUSE - ECU-B NO.1 FUSE - AM2 FUSE - ST NO. 1 FUSE - ST NO. 2 FUSE |
*6 | NO. 2 ENGINE ROOM RELAY BLOCK - IG NO. 4 RELAY - STOP FUSE |
ILLUSTRATION
| *1 | BACK DOOR OPENER SWITCH ASSEMBLY | *2 | DOOR CONTROL RECEIVER |
| *3 | FRONT DOOR OUTSIDE HANDLE ASSEMBLY RH | *4 | FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH |
| *5 | NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (FRONT FLOOR) | *6 | NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (CENTER FLOOR) |
| *7 | NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (REAR FLOOR) | *8 | ELECTRICAL KEY ANTENNA (OUTSIDE BACK DOOR) |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | ENGINE SWITCH | *2 | STOP LIGHT SWITCH ASSEMBLY |
| *3 | COMBINATION METER ASSEMBLY | *4 | STEERING LOCK ECU (STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY) |
| *5 | DLC3 | *6 | JUNCTION BLOCK ASSEMBLY LH - ACC RELAY - IG1 NO. 1 RELAY - IG1 NO. 2 RELAY - IG1 NO. 3 RELAY - SMART FUSE - ECU-ACC FUSE - ECU-IG NO. 1 FUSE - WIPER FUSE - BKUP LP FUSE |
| *7 | SHIFT LOCK CONTROL UNIT ASSEMBLY | *8 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
| *9 | ID CODE BOX (IMMOBILISER CODE ECU) | *10 | ENGINE STOP AND START ECU |
| *a | Refer to Service Bulletin for installation position of the parts. | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | ENGINE SWITCH | *2 | STOP LIGHT SWITCH ASSEMBLY |
| *3 | COMBINATION METER ASSEMBLY | *4 | STEERING LOCK ECU (STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY) |
| *5 | DLC3 | *6 | JUNCTION BLOCK ASSEMBLY LH - ACC RELAY - IG1 NO. 1 RELAY - IG1 NO. 2 RELAY - IG1 NO. 3 RELAY - SMART FUSE - ECU-ACC FUSE - ECU-IG NO. 1 FUSE - WIPER FUSE - BKUP LP FUSE |
| *7 | SHIFT LOCK CONTROL UNIT ASSEMBLY | *8 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
| *9 | ID CODE BOX (IMMOBILISER CODE ECU) | *10 | ENGINE STOP AND START ECU |
| *a | Refer to Service Bulletin for installation position of the parts. | - | - |