DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. 

      Engage the hook to install the door control receiver.

   2. Install the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   3. Connect the connector.

2. INSTALL QUARTER LOCK PILLAR GARNISH LH

   Click here

3. INSTALL QUARTER TRIM REAR PANEL ASSEMBLY LH

   Click here

4. INSTALL DECK SIDE GARNISH LH

   Click here

5. INSTALL ROPE HOOK ASSEMBLY

   Click here

6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

8. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

9. INSTALL BACK DOOR SCUFF PLATE

   Click here

10. INSTALL UTILITY BOX SUB-ASSEMBLY

    Click here

11. INSTALL REAR NO. 2 FLOOR BOARD UPPER PLATE

    Click here

12. INSTALL REAR NO. 3 FLOOR BOARD ASSEMBLY

    Click here

13. INSTALL REAR NO. 2 FLOOR BOARD ASSEMBLY

    Click here

14. INSTALL REAR NO. 1 FLOOR BOARD ASSEMBLY

    Click here

15. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here

16. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

    Click here

17. INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

    Click here

18. PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

    Click here