DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A01IHZZC01
      *a

      Component without harness connected

      (Multiplex Network Master Switch Assembly)
      *b LED Illumination

      Check that the LED illuminates.


      1. Apply battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

        OK
        Battery connection Result

        Battery positive (+) - 3 (ILL+)

        Battery negative (-) - 13 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the multiplex network master switch assembly.