WIRELESS DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Engine switch on (ACC) signal OFF or ON

      OFF: Engine switch off

      ON: Engine switch on (ACC)

      		 -
      IG SW Engine switch on (IG) signal OFF or ON

      OFF: Engine switch off or on (ACC)

      ON: Engine switch on (IG)

      		 -
      RR Door Courtesy SW Rear door courtesy light switch assembly RH signal OFF or ON

      OFF: Slide door RH closed

      ON: Slide door RH open

      		 -
      RL Door Courtesy SW Rear door courtesy light switch assembly LH signal OFF or ON

      OFF: Slide door LH closed

      ON: Slide door LH open

      		 -
      Back Door Courtesy SW Back door courtesy switch signal OFF or ON

      OFF: Back door closed

      ON: Back door open

      		 -
      FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch assembly RH signal OFF or ON

      OFF: Front door RH closed

      ON: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch assembly LH signal OFF or ON

      OFF: Front door LH closed

      ON: Front door LH open

      		 -
      RR-Door Lock Pos SW Slide door RH unlock detection switch signal OFF or ON

      OFF: Slide door RH locked

      ON: Slide door RH unlocked

      		 -
      RL-Door Lock Pos SW Slide door LH unlock detection switch signal OFF or ON

      OFF: Slide door LH locked

      ON: Slide door LH unlocked

      		 -
      Wireless Control Wireless door lock control function OFF or ON Customize setting displayed -
      Hazard Answer Back Hazard answer-back of wireless function OFF or ON Customize setting displayed -
      Open Door Warning Open door warning OFF or ON Customize setting displayed *1
      Auto Lock Time Automatic lock time 30 s, 60 s or 120 s Customize setting displayed -
      Wireless Buzzer Resp Buzzer answer-back of wireless OFF or ON Customize setting displayed *2
      P/W Wireless Ope Buzz Buzzer sounds of wireless power window OFF or ON Customize setting displayed -
      Wireless Buzzer Vol Wireless door lock buzzer volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Customize setting displayed *2

      • *1: w/o Panoramic View Monitor System

      • *2: w/ Wireless Door Lock Buzzer Answer-back Function


      Body Electrical > Entry&Start > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      # Codes Number of DTCs 0 to 255 Number of stored DTCs -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Door Lock Door lock motor OFF/Unlock/Lock -
      Trunk and Back-Door Open Back door lock motor OFF/ON -
      Wireless Buzzer Wireless door lock buzzer OFF/ON -