TRANSMITTER BATTERY REPLACEMENT

PROCEDURE


  1. REMOVE CUT KEY

    Click here

  2. REMOVE SMART KEY DOOR CONTROL TRANSMITTER HOUSING SET

    Click here

  3. REMOVE TRANSMITTER BATTERY


    1. A01IGMEC02
      *a Protective Tape
      B006N8A Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the transmitter battery as shown in the illustration.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  4. INSTALL TRANSMITTER BATTERY


    1. A01IG6YC01
      B006N8A Install in this Direction

      Engage the claws to install the transmitter battery as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing cover free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  5. INSTALL SMART KEY DOOR CONTROL TRANSMITTER HOUSING SET

    Click here

  6. INSTALL CUT KEY

    Click here