WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Wireless Door Lock.

      5. Select the setting by referring to the table below.


        Wireless Door Lock
        Tester Display Description Default Setting ECU
        Wireless Control Function that turns the wireless door lock control system on or off ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Hazard Answer Back Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Open Door Warning Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar.*1 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Auto Lock Time Function that regulates the interval between unlocking and automatic relocking of the doors 30 s 00:30 s,01:60 s,10:120 s Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Resp Wireless door lock buzzer response*2 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Wireless Ope Buzz Wireless power window buzzer response*1 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Vol Wireless door lock buzzer volume*2 Level5 0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0 Main body ECU (Multiplex network body ECU)

        • *1: w/o Panoramic View Monitor System

        • *2: w/ Wireless Door Lock Buzzer Answer-back Function

    2. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: APPS or SETUP / Vehicle / Vehicle customization / Door lock settings. (for Radio and Display Type)

      3. Enter the following menus: APPS / Setup / Vehicle / Vehicle customization / Door lock settings. (for Navigation Receiver Type)

      4. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Lock/unlock feedback-lights On

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        		 On or Off Main body ECU (Multiplex network body ECU)
        Lock feedback volume 5 Wireless door lock buzzer volume*1 Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)

        • *1: w/ Wireless Door Lock Buzzer Answer-back Function