NETWORK GATEWAY ECU INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE


  1. INSTALL NETWORK GATEWAY ECU


    1. A01UCFJC01
      *a Stopper
      *b Hole

      Align the stopper of the network gateway ECU with the hole of the instrument panel reinforcement assembly and temporarily install the network gateway ECU to the instrument panel reinforcement assembly.

    2. Install the bolt.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    3. Connect the network gateway ECU connector.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here