REAR CENTER SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 2 SEAT 3 POINT TYPE BELT ASSEMBLY


    1. A01IGWNC02
      *a Lock
      *b Unlock
      *c 45°

      Before installing the rear No. 2 seat 3 point type belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

        If the result is not as specified, replace the rear No. 2 seat 3 point type belt assembly.