REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for Manual Captain Seat) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY


    1. A01IFNSC03
      *a Unlock
      *b Lock
      *c 45°

      Before installing the No. 1 seat 3 point type belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

        If the result is not as specified, replace the No. 1 seat 3 point type belt assembly.