REAR NO. 2 SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

    Click here

  2. REMOVE REAR NO. 2 SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE NO. 2 SEAT CUSHION STOPPER

    Click here

  4. REMOVE SEAT LEG COVER


    1. A01IIAA

      Using a clip remover, detach the 3 clips.

    2. A01IHSDC01
      B006N8A Remove in this Direction

      Pull up in the direction indicated by the arrow shown in the illustration to remove the seat leg cover.

  5. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY RH


    1. A01IL4N

      Cut the clamp.

    2. A01IEMT

      Remove the bolt and rear No. 2 seat inner belt assembly RH.

  6. REMOVE NO. 2 SEAT LAP TYPE BELT ASSEMBLY


    1. A01IFA7

      Remove the No. 2 seat lap type belt assembly.

    2. A01IIB2C01
      B006N8A Remove in this Direction

      Remove the rear No. 2 seat inner belt assembly RH and No. 2 seat lap type belt assembly from the hole of the separate type rear seat cushion cover with pad as shown in the illustration.

  7. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  8. REMOVE REAR NO. 2 SEAT LAP TYPE BELT ASSEMBLY

    Tech Tips

    Use the same procedure as for the RH side.