REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Power Captain Seat without Memory) INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. A01IIJ1C04
      *a

      Component without harness connected

      (Rear No. 1 Seat Inner Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 - 5 Front seat belt unfastened Below 1 Ω
      Front seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.

  2. INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. A01IIJ1C05
      *a

      Component without harness connected

      (Rear No. 1 Seat Inner Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 - 5 Front seat belt unfastened Below 1 Ω
      Front seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.