REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Power Captain Seat with Memory) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. B006QJ6C01
      *a Protruding Part
      B006N8A Install in this Direction

      Install the rear No. 1 seat inner belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear No. 1 seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    2. B006MEU

      Attach the wire harness clamp.

    3. Connect the connector.

  2. INSTALL REAR NO. 1 SEAT INSIDE RECLINING ADJUSTER COVER

    Click here

  3. INSTALL REAR SEAT ARMREST FRAME SUB-ASSEMBLY RH

    Click here

  4. INSTALL REAR SEAT TURN TABLE ASSEMBLY LH

    Click here

  5. INSTALL REAR NO.1 SEAT LEG BRACKET

    Click here

  6. INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY RH

    Click here

  7. INSTALL REAR SEAT CUSHION MOULDING LH

    Click here

  8. INSTALL SEAT ADJUSTER COVER CAP RH

    Click here

  9. INSTALL RECLINING ADJUSTER COVER RH

    Click here

  10. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    Click here