REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Power Captain Seat with Memory) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

    Click here

  2. REMOVE RECLINING ADJUSTER COVER RH

    Click here

  3. REMOVE SEAT ADJUSTER COVER CAP RH (w/o Manual Walk-in Mechanism)

    Click here

  4. REMOVE SEAT ADJUSTER COVER CAP LH (w/ Manual Walk-in Mechanism)

    Click here

  5. REMOVE REAR SEAT CUSHION MOULDING LH

    Click here

  6. REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY RH

    Click here

  7. REMOVE REAR NO. 1 SEAT LEG BRACKET

    Click here

  8. REMOVE REAR SEAT TURN TABLE ASSEMBLY LH

    Click here

  9. REMOVE REAR SEAT ARMREST FRAME SUB-ASSEMBLY RH

    Click here

  10. REMOVE REAR NO. 1 SEAT INSIDE RECLINING ADJUSTER COVER

    Click here

  11. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. B006MEU

      Disconnect the connector.

    2. Detach the wire harness clamp.

    3. B006L5EC01
      B006N8A Remove in this Direction

      Remove the bolt and rear No. 1 seat inner belt assembly LH.