REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for Power Captain Seat with Memory) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

    Click here

  2. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  4. REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY LH

    Click here

  5. REMOVE REAR SEAT CUSHION

    Click here

  6. REMOVE SEAT ADJUSTER COVER CAP LH

    Click here

  7. REMOVE REAR SEAT RECLINING COVER LH

    Click here

  8. REMOVE REAR SEAT ARMREST FRAME SUB-ASSEMBLY LH

    Click here

  9. REMOVE REAR NO. 1 SEAT INSIDE RECLINING ADJUSTER COVER

    Click here

  10. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

  11. REMOVE RECLINING ADJUSTER COVER RH

    Click here

  12. REMOVE SEAT ADJUSTER COVER CAP RH

    Click here

  13. REMOVE REAR SEAT CUSHION MOULDING LH

    Click here

  14. REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY RH

    Click here

  15. REMOVE REAR NO. 1 SEAT LEG BRACKET

    Click here

  16. REMOVE REAR SEAT TURN TABLE ASSEMBLY LH

    Click here

  17. REMOVE REAR SEAT ARMREST FRAME SUB-ASSEMBLY RH

    Click here

  18. REMOVE REAR NO. 1 SEAT INSIDE RECLINING ADJUSTER COVER

    Click here

  19. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH (for Seat Anchor)


    1. B006MNG

      Remove the bolt and disconnect the No. 1 seat 3 point type belt assembly LH (for Seat Anchor).

    2. Pull out the No. 1 seat 3 point type belt assembly LH as shown in the illustration.

  20. REMOVE REAR SEAT SHOULDER BELT COVER LH

    Click here

  21. REMOVE SEAT STAND FRAME CAP

    Click here

  22. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  23. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD

    Click here

  24. REMOVE REAR NO. 2 SEAT PROTECTOR

    Click here

  25. REMOVE REAR SEAT INNER RECLINING COVER LH

    Click here

  26. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH


    1. B006M4Y

      Remove the 2 screws and seat belt guide.

    2. B006R9R

      Detach the claw and remove the rear seat shoulder belt hole cover LH.

    3. Remove the 3 nuts (B) and disconnect the reclining sensor.

      B006M09C02
      *A for RH Seat *B for LH Seat

    4. Remove the nut (A).

    5. Detach the guide and remove the No. 1 seat 3 point type belt assembly LH.