FRONT SEAT INNER BELT ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)


    1. Install the front seat belt anchor plate.

    2. B006L1PC02
      *a Protruding Part

      Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    3. B006KOE

      Attach the wire harness clamp and connector clamp.

    4. Connect the connector.

  2. INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Driver Side)

    Click here

  3. INSTALL FRONT SEAT ASSEMBLY LH (for Driver Side)

    Click here

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)


    1. Install the front seat belt anchor plate.

    2. B006Q17C02
      *a Protruding Part

      Install the front seat inner belt assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

    3. B006RC0

      Attach the wire harness clamp and connector clamp.

    4. Connect the connector.

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  6. INSTALL FRONT SEAT ASSEMBLY RH (for Front Passenger Side)

    Click here