OCCUPANT DETECTION SENSOR INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Manual Seat)

    Tech Tips


    • Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover RH when installing the seat cover.

      Click here


    • As shown in the illustration, fix all of the cover seam allowances in the same direction.

      B006KTEE01

    1. Temporarily install the separate type front seat cushion cover RH to the separate type front seat cushion pad RH.

    2. Using hog ring pliers, install the separate type front seat cushion cover RH to the separate type front seat cushion pad RH with 18 new hog rings in the order shown in the illustration.

      B006L97C01
      *1 Hog Ring Pliers - -

    3. Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover RH to the separate type front seat cushion pad with 2 new hog rings.

      Tech Tips


      • Do not dirty or damage the separate type front seatback cover RH.


      • Securely tighten the hog rings as shown in the illustration while making sure wrinkles do not form in the center of the fabric and separate type front seatback pad.

      B006NQXC01
      *1 Hog Ring Pliers - -

  2. INSTALL SEAT CUSHION COVER WITH PAD (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  3. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat)

    Click here

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  5. INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  7. INSTALL FRONT SEAT LEG COVER (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  8. INSTALL FRONT SEAT LEG ASSEMBLY LH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  10. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Power Seat)

    Tech Tips


    • Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover RH when installing the seat cover.

      Click here


    • As shown in the illustration, fix all of the cover seam allowances in the same direction.

    B006PUOC01
    *A w/ Seatback Board *B w/ Seatback Hook

    1. Set the separate type front seat cushion cover.

    2. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 21 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type front seat cushion cover.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      B006NWZC02
      *1 Hog Ring Pliers - -
      *a Cutout - -

    3. Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover LH to the separate type front seat cushion pad with 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      Tech Tips

      Install the hog rings at the cutouts if they are there.

      B006L6TC01
      *1 Hog Ring Pliers - -

  11. INSTALL SEAT CUSHION COVER WITH PAD (for Power Seat)

    Click here

  12. INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Power Seat)

    Click here

  13. INSTALL FRONT SEAT CUSHION SHIELD RH (for Power Seat)

    Click here

  14. INSTALL POWER SEAT SWITCH KNOB RH (for Power Seat, Reclining)

    Click here

  15. INSTALL POWER SEAT SWITCH KNOB RH (for Power Seat, Slide)

    Click here

  16. INSTALL FRONT SEAT LEG COVER (for Power Seat)

    Click here

  17. INSTALL FRONT SEAT LEG ASSEMBLY RH (for Power Seat)

    Click here

  18. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)

    Click here

  19. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Super Long Slide Seat)

    Tech Tips


    • Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover LH when installing the seat cover.

      Click here


    • Align the seam allowance in a single direction as shown in the illustration.

      B006LITC01
      *A Type A *B Type b

    1. Set the separate type front seat cushion cover.

    2. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 19 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type front seat cushion cover.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      B006N3DC02
      *1 Hog Ring Pliers *2 Fastening Tape

    3. Install the fastening tape.

    4. Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover to the separate type front seat cushion pad with 3 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      Tech Tips

      Install the hog rings at the cutouts if they are there.

      B006OBFC03
      *1 Hog Ring Pliers - -
      *a Cutout - -

  20. INSTALL SEAT CUSHION COVER WITH PAD (for Super Long Slide Seat)

    Click here

  21. INSTALL FRONT SEAT NO. 1 LEGREST COVER (for Super Long Slide Seat)

    Click here

  22. INSTALL FRONT SEAT RECLINING ADJUSTER INSIDE COVER (for Super Long Slide Seat)

    Click here

  23. INSTALL FRONT SEAT CUSHION SHIELD LH (for Super Long Slide Seat)

    Click here

  24. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (for Super Long Slide Seat)

    Click here

  25. INSTALL FRONT SEAT CUSHION SHIELD LH (for Super Long Slide Seat)

    Click here

  26. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Super Long Slide Seat)

    Click here

  27. INSTALL SEAT TRACK LOCK OPEN LEVER LH (for Super Long Slide Seat)

    Click here

  28. INSTALL FRONT SEAT CUSHION LEVER (for Super Long Slide Seat)

    Click here

  29. INSTALL FRONT SEAT CUSHION SHIELD LH (for Super Long Slide Seat)

    Click here

  30. INSTALL FRONT SEAT LEG COVER (for Super Long Slide Seat)

    Click here

  31. INSTALL NO. 1 SEAT LEG COVER SUB-ASSEMBLY (for Super Long Slide Seat)

    Click here

  32. INSTALL NO. 1 SEAT LEG COVER SUB-ASSEMBLY (for Super Long Slide Seat)

    Click here

  33. INSTALL FRONT SEAT HEADREST ASSEMBLY LH (for Super Long Slide Seat)

    Click here

  34. INSTALL FRONT SEAT ASSEMBLY LH (for Super Long Slide Seat)

    Click here