REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Manual Captain Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. B006M2FC02
      *a Protruding Part

      Install the rear No. 1 seat inner belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      The anchor part of the rear No. 1 seat inner belt assembly RH must not overlap the protruding part.

  2. INSTALL REAR SEAT CUSHION MOULDING LH

    Click here

  3. INSTALL REAR SEAT SIDE TABLE ASSEMBLY (for RH Side)

    Click here

  4. INSTALL SEAT ADJUSTER COVER CAP LH (for RH Side)

    Click here

  5. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    Click here