REAR SEAT CUSHION HEATER(for Power Captain Seat without Memory) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH and LH sides.

PROCEDURE


  1. INSPECT SEAT HEATER ASSEMBLY


    1. Check the seat heater assembly.


      1. B006O20C23
        *a

        Component without harness connected

        (Seat Heater Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (HTR-) - 4 (IG1) Seat heater temperature 20°C (68°F) 5.20 to 6.22 Ω
        1 (HTR-) - 5 (HTR+) 5.41 to 6.47 Ω
        4 (IG1) - 5 (HTR+) Below 1 Ω
        2 (TMT-) - 3 (TMT+) 11.94 to 12.24 kΩ

        If the result is not as specified, replace the seat heater assembly.