REAR SEAT CUSHION HEATER(for Power Captain Seat with Memory) INSPECTION

PROCEDURE


  1. INSPECT SEAT HEATER ASSEMBLY


    1. Check the seat heater assembly.


      1. B006O20C23
        *a

        Component without harness connected

        (Seat Heater Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (HTR-) - 4 (IG1) Seat heater temperature 20°C (68°F) 3.6 to 4.4 Ω
        1 (HTR-) - 5 (HTR+)
        4 (IG1) - 5 (HTR+) Below 1 Ω
        2 (TMT-) - 3 (TMT+) 8.0 to 12 kΩ

        If the result is not as specified, replace the seat heater assembly.