REAR CONTROL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR POWER SEAT SWITCH LH


    1. Install the rear power seat switch with the 4 screws.

      B006MSHC01
      B006N8A Install in this Direction - -
    2. B006PWM

      Install the rear seat center armrest cover with the 2 screws.

    3. B006O3H

      Attach the claw to install the rear No. 1 seat cover bezel.

    4. B006LUB

      Close the rear seat armrest door LH.

    5. B006NKEC01
      B006N8A Install in this Direction

      Install the rear seat armrest pad sub-assembly LH.

    6. B006O85C01
      *1 Wire Harness Clamp
      *2 Guide

      Attach the guide and install the rear seat armrest bracket LH with the 4 screws.

    7. Attach the wire harness clamp and connect the wire harness.

  2. INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH

    Click here

  3. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  4. INSTALL REAR POWER SEAT SWITCH LH

    Click here

  5. INSTALL REAR NO. 1 SEAT ASSEMBLY

    Click here