REAR CONTROL SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY

    Click here

  2. REMOVE REAR POWER SEAT SWITCH LH

    Click here

  3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  4. REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY LH

    Click here

  5. REMOVE REAR POWER SEAT SWITCH LH


    1. B006O85C01
      *1 Wire Harness Clamp
      *2 Guide

      Detach the wire harness clamp and disconnect the wire harness.

    2. Remove the 4 screws, detach the guide and remove the rear seat armrest bracket LH.

    3. B006PM5C01
      B006N8A Remove in this Direction

      Remove the rear seat armrest pad sub-assembly LH.

    4. B006PKA

      Press the button and open the rear seat armrest door LH.

    5. B006O3H

      Detach the claw and remove the rear No. 1 seat cover bezel.

    6. B006PWM

      Remove the 2 screws and rear seat center armrest cover.

    7. Remove the 4 screws and rear power seat switch.

      B006PI0C01
      B006N8A Remove in this Direction - -