REAR SEATBACK HEATER(for Power Captain Seat without Memory) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH and LH sides.

PROCEDURE


  1. INSPECT SEAT HEATER ASSEMBLY


    1. Check the seat heater assembly.


      1. B006NOBC01
        *a

        Component without harness connected

        (Seat Heater Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (HTR-) - 2 (IG1) Seat heater temperature 20°C (68°F) 3.74 to 4.48 Ω

        If the result is not as specified, replace the seat heater assembly.