REAR SEATBACK HEATER INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
-
Use the same procedure for RHD and LHD vehicles.
-
The procedures listed below are for LHD vehicles.
-
Use the same procedure for the RH and LH sides.
-
The procedure listed below is for the LH side.
PROCEDURE
-
INSTALL SEAT HEATER ASSEMBLY
-
Using a tacker, install the seat heater assembly with 12 new tack pins as shown in the illustration.
Tech Tips
-
Secure the seat heater assembly so that it does not bend or stretch.
-
Set the seat heater assembly so that the nichrome wire is on the separate type rear seatback cover side.
*1 Separate Type Rear Seatback Cover *2 Seat Heater Assembly *3 Tack Pin - - *a Tack Pin Fastening Position - - -
-
-
INSTALL SEAT COVER WIRE
-
INSTALL SEPARATE TYPE REAR SEATBACK COVER
-
INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD
-
INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY
-
INSTALL SEAT STAND FRAME CAP
-
INSTALL REAR SEAT SHOULDER BELT COVER LH
-
CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
-
INSTALL REAR NO. 3 POWER SEAT SWITCH
-
INSTALL REAR NO. 1 SEAT INSIDE RECLINING ADJUSTER COVER
-
INSTALL REAR SEAT ARMREST FRAME SUB-ASSEMBLY RH
-
INSTALL REAR SEAT TURN TABLE ASSEMBLY LH
-
INSTALL REAR NO. 1 SEAT LEG BRACKET
-
INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY RH
-
INSTALL REAR SEAT CUSHION MOULDING LH
-
INSTALL SEAT ADJUSTER COVER CAP RH
-
INSTALL RECLINING ADJUSTER COVER RH
-
INSTALL REAR SEAT ARMREST FRAME SUB-ASSEMBLY LH
-
INSTALL REAR SEAT RECLINING COVER LH
-
INSTALL SEAT ADJUSTER COVER CAP LH
-
INSTALL REAR SEAT CUSHION
-
INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH
-
INSTALL REAR NO. 1 SEAT RECLINING COVER LH
-
INSTALL REAR POWER SEAT SWITCH LH
-
INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
-
INSTALL REAR NO. 1 SEAT ASSEMBLY