SEAT HEATER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.


  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 2 BOX BOTTOM MAT

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  5. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    1. B006MUKC01
      *a Protective Tape
      B006Q1Z Place Hand Here
      B006N8A Remove in this Direction

      Put protective tape around the front No. 2 console box insert.

    2. Place your hand at the position shown in the illustration and pull in the direction indicated by the arrow to detach the claw.

    3. Disconnect the connector and remove the front No. 2 console box insert.