REAR POWER SEAT MOTOR ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

B006LWS

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL POWER SEAT MOTOR ASSEMBLY


    1. B006RE5

      While turning the cable end as shown in the illustration, connect it.

    2. Attach the cable clamp.

    3. B006OR5

      Install the power seat motor assembly with the 3 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    4. Attach the wire harness clamp and connect the wire harness.

    5. Connect the 2 connectors.

  2. INSTALL REAR SEAT CLIMATE CONTROL ECU LH

    Click here

  3. INSTALL POSITION CONTROL ECU ASSEMBLY

    Click here

  4. INSTALL REAR SEAT LEG COVER LH

    Click here

  5. INSTALL SEAT ADJUSTER COVER CAP RH (w/o Manual Walk-in Mechanism)

    Click here

  6. INSTALL SEAT ADJUSTER COVER CAP LH (w/o Manual Walk-in Mechanism)

    Click here

  7. INSTALL SEAT ADJUSTER COVER CAP LH (w/ Manual Walk-in Mechanism)

    Click here

  8. INSTALL SEAT ADJUSTER COVER CAP RH (w/ Manual Walk-in Mechanism)

    Click here

  9. INSTALL REAR SEAT CUSHION

    Click here

  10. INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH

    Click here

  11. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  12. INSTALL REAR POWER SEAT SWITCH LH

    Click here

  13. INSTALL REAR NO. 1 SEAT ASSEMBLY

    Click here