REAR POWER SEAT MOTOR ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

B006LWS

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY

    Click here

  2. REMOVE REAR POWER SEAT SWITCH LH

    Click here

  3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  4. REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY LH

    Click here

  5. REMOVE REAR SEAT CUSHION

    Click here

  6. REMOVE SEAT ADJUSTER COVER CAP LH (w/o Manual Walk-in Mechanism)

    Click here

  7. REMOVE SEAT ADJUSTER COVER CAP RH (w/o Manual Walk-in Mechanism)

    Click here

  8. REMOVE SEAT ADJUSTER COVER CAP RH (w/ Manual Walk-in Mechanism)

    Click here

  9. REMOVE SEAT ADJUSTER COVER CAP LH (w/ Manual Walk-in Mechanism)

    Click here

  10. REMOVE REAR SEAT LEG COVER LH

    Click here

  11. REMOVE POSITION CONTROL ECU ASSEMBLY

    Click here

  12. REMOVE REAR SEAT CLIMATE CONTROL ECU LH

    Click here

  13. REMOVE POWER SEAT MOTOR ASSEMBLY


    1. B006OR5

      Disconnect the 2 connectors.

    2. Detach the wire harness clamp and disconnect the wire harness.

    3. Remove the 3 nuts.

    4. B006M63

      Detach the cable clamp.

    5. While turning the cable end as shown in the illustration, disconnect it and remove the power seat motor assembly.